200 Connecticut Avenue · Norwalk, CT
Planning & Zoning presentation

Proposed building-name sign: “SUMMIT 200”

One halo-lit cornice sign on the penthouse facade facing Connecticut Avenue. Two placements are presented for the Commission’s consideration. The sign itself is identical in both.

Issue 1 · P&Z submission · October 2026
Photo simulation of the proposed sign on the penthouse facade
Showing:
Centered over the middle window, ±8′-6″ below the penthouse roofline.
29′-11″ × 2′-10″Overall sign size (30′-0″ max. width)
±84.8 SFof ±87.3 SF allowed (1 SF per LF of 87′-4″ face)
34 in.Letter height (48 in. max.)
6½ in.Projection from wall (12 in. max.)
3000K haloStatic white LED, 200 nits max., dimmable
Off 11 PM – 6 AMAutomatic time switch (proposed condition)
Two placements

Location A or Location B

Both placements are on the penthouse (top story) facade, wholly below the roofline and within 10′-0″ of it, and centered over the middle window. Select either one to update the whole page.

Location A, mid-wall, day simulation
Location A

Mid-wall, above the windows

  • Sign sits on blank wall directly above the middle window band.
  • About 8′-6″ below the penthouse roofline.
  • Clear of glazing; well away from the existing rooftop antennas.
Location B, upper band, day simulation
Location B

Upper band, just below the roofline

  • Sign sits in the upper band above the existing horizontal reveal.
  • About 1′-6″ below the penthouse roofline; reads higher on the skyline.
  • Clear of the existing antennas at the right. Carrier coordination required before installation.
Sheet SG-1

Photo simulations

Existing-conditions photographs with the sign drawn to scale. Select any image to enlarge it.

Day simulation, building context
Day: building context from the northwest
Day simulation, penthouse detail
Day: penthouse detail
Dusk simulation showing halo illumination
Dusk: halo illumination, 3000K, 200 nits max.
Existing penthouse facade without sign
Existing: penthouse facade today, no signage
Aerial photo locating the penthouse facade facing Connecticut Avenue
Location: aerial view; the penthouse facade facing Connecticut Avenue (U.S. Route 1) is outlined in red
Motion

Video renderings

AI-assisted illustrative renderings of the sign by day and at night. The photo simulations and drawings are the controlling exhibits.

Drawing set · 8 pages

Plans & drawings

Sheets G-0 and SG-1 to SG-6 with the Statement of Use. Select a sheet to open it full screen. Use the arrow keys to page through, and click the sheet to zoom.

Download full PDF ↓
Sheet SG-6

Zoning compliance

Norwalk Building Zone Regulations, Article 7, Table 7.1.2.B-2 (cornice sign) and Section 8.4.8.

#StandardPermittedProposedStatus
OK complies · CONFIRM complies, subject to City confirmation · SP Special Permit may be required (§8.4.8)
Statement of use

The request in brief

Request

Approval of one (1) cornice sign on the penthouse facade facing Connecticut Avenue, identifying the building by name, “SUMMIT 200”, with an open-peak symbol.

Description

Individually attached, reverse-pan (halo-lit) aluminum channel letters in navy and a bronze open-peak mark, centered over the middle window of the penthouse face and wholly below the roofline. 29′-11″ × 2′-10″ (±84.8 SF), 34-inch letters, 6½-inch projection.

Illumination

Static 3000K white LED concealed in each letter and aimed at the wall for a soft halo. Max. 200 nits, field-dimmable, no exposed lamps, flashing, animation or changeable copy. If halo lighting is classified as backlighting, a Special Permit under §8.4.8 is requested, with dimming and an 11 PM – 6 AM shut-off offered as conditions.

Compatibility

Scaled to the penthouse facade in a restrained navy and bronze palette that complements the white penthouse and precast building. Windows and architectural features are not obscured. Low-glare lighting and the curfew account for the planned residential use of the upper floors and nearby homes.

Construction

Fabrication, attachment and electrical work by a licensed sign contractor under separate building and electrical permits; attachment designed by a Connecticut-licensed engineer; UL-listed, wet-location components per NEC Article 600.

Future copy

The applicant asks whether a future change of copy within the same approved location and envelope may be reviewed administratively.